Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

Stabilizer Bushings 07 HHR

Old 01-13-2011, 06:34 AM
  #1  
Thread Starter
 
joeg.satx's Avatar
 
Join Date: 01-12-2011
Location: san antonio tx
Posts: 2
Stabilizer Bushings 07 HHR

I had a rattle in my front end , almost sounded like a knocking noise like the struts. I took it the first time to the dealer and it was taken care of because of the warranty. It happened again at 45k miles and i when and bought the stabilizer bushings for stabilizer bar for $3.78 ea and i needed two. I paid my mechanic $50 to put them on and the noise was gone! They will ask for a vin number because there are two different size stabilizer bars.
joeg.satx is offline  
Old 01-13-2011, 10:22 AM
  #2  
Senior Member
 
jay loukakis's Avatar
 
Join Date: 10-21-2008
Location: hemet, calif.
Posts: 1,831
sway bar

most peole are replaceing the links, I just orderd the Moog regreaseable, will be here next week, I didnt know thebar comes in 2 widgths the Eibach is a larger diameter.
jay loukakis is offline  
Old 01-17-2011, 11:35 AM
  #3  
Senior Member
 
helhedded's Avatar
 
Join Date: 11-14-2006
Location: Memphis, Tn
Posts: 132
Does anyone have a part# handy on the bushings? Or will they know what Im talking about if I say I need front stabilizer bar bushings for a 07 hhr? I was gonna run up to Advance after work and get my parts ordered so I can fix my clunky front end.
helhedded is offline  
Old 01-17-2011, 11:42 AM
  #4  
Member
 
brazodoro's Avatar
 
Join Date: 08-18-2009
Location: Plano Texas
Posts: 52
A piece of advice- get aftermarket sway bar bushings. I had less than 30K on my car and replaced them. The OEM's broke apart in the mechanics hand. Once I saw that the stock bushings were low quality, I went aftermarket. I am at 60k now with no return of the knocking problem.
brazodoro is offline  
Old 01-17-2011, 11:47 AM
  #5  
Senior Member
 
Greybeard999's Avatar
 
Join Date: 03-06-2010
Location: Ohio
Posts: 6,869
What aftermarket bushings did you use? Got some part numbers?
Greybeard999 is offline  
Old 01-17-2011, 12:54 PM
  #6  
Senior Member
 
Mrs. DLVRNIT's Avatar
 
Join Date: 05-26-2009
Location: NorCal BayArea
Posts: 726
Here's a "small" selection of front bar bushings from energy suspension:

http://www.energysuspensionparts.com...r-Bushings.asp

Remember when purchasing to only purchase (1) as they are sold in pairs, DOH .....

Best-O-Luck ,
Mrs. DLVRNIT is offline  
Old 01-17-2011, 01:04 PM
  #7  
Senior Member
 
helhedded's Avatar
 
Join Date: 11-14-2006
Location: Memphis, Tn
Posts: 132
Thanks for the info. Does anyone know what size is needed for an 07 LT?
helhedded is offline  
Old 01-17-2011, 01:17 PM
  #8  
Senior Member
 
Mrs. DLVRNIT's Avatar
 
Join Date: 05-26-2009
Location: NorCal BayArea
Posts: 726
Were pretty sure most stock LT or LS Front Bars are 25mm dia! We recommend the taller greaseable version in black !

Best-O-Luck ,
Mrs. DLVRNIT is offline  
Old 01-17-2011, 04:47 PM
  #9  
Senior Member
 
jay loukakis's Avatar
 
Join Date: 10-21-2008
Location: hemet, calif.
Posts: 1,831
It seems you get smarter each year after the Toms Farm 2g2 next year you will SOOO smart I dont know if we can put up with you, HAHAHA I tried to order the bushings from the site you listed they may be closed today, and my air cleaner is not to tight.
jay loukakis is offline  
Old 01-17-2011, 05:02 PM
  #10  
Senior Member
 
jay loukakis's Avatar
 
Join Date: 10-21-2008
Location: hemet, calif.
Posts: 1,831
bushings

I had given my e-mail this morning, they just got back to me and I ordered the bushings thanks fo the info.
jay loukakis is offline  

Thread Tools
Search this Thread
Quick Reply: Stabilizer Bushings 07 HHR



All times are GMT -5. The time now is 10:06 AM.